mounted atomizer sprayer 800 and 1000 liter

Description

Mounted atomizer sprayer

atomizer sprayer fan 900 and 800 mm Garden turbine sprayer (riding atomizer sprayer) is very suitable for spraying all kinds of gardens

Complete covering of leaf and stem surface of trees with suitable volume of produced air and spraying of nozzle powder

• Polyethylene poison tank with a capacity of 800 and 1000 liters, equipped with system washing tank and hand washing
• Valved door
• Resistant to sunlight
• Hydraulic stirrer crack
• Poison tank water level indicator, poison tank three-way valve
• Fan with a diameter of 800 and 900 mm Ability to distribute the wind evenly throughout the fan surface. And the subsequent wind outflow to an extent from each network, has 2 fixed
• impellers and one mobile impeller
• It has adjustable valves and air direction, for uniformity and angle adjustment and for spraying poison
• Has a spray terminal to uniformly distribute the toxin to each nozzle and, consequently, the toxin out of the nozzle to an equal extent
• Spraying width 10 meters on each side and 8 meters upwards
• The fan parts consist entirely of bent sheets and laser cut with thicknesses of 2, 3 and 5 mm
• It has a large two-speed gearbox that increases the Italian fan speed
• It has 14 Italian nozzles in 800 mm fan and 16 Italian nozzles in 900 mm fan
• Double-headed and anti-drip brass nozzles with fully powdered and uniform spray of poison solution
• All hoses used in chassis and fan are high pressure hoses with a layer of steel wire

Mounted atomizer sprayer fan 900 and 800 chassis

• High-strength, standard-mounted chassis with automatic pin lock. For easy and safe connection of the sprayer to the tractor and the handle of the automatic regulator valve
• Chassis composed entirely of bent sheets and laser cut with thicknesses of 5, 8 and 12 mm
• Steel wheel for easy movement of the device
• It has a hose reel and a 5-layer hose ring and lance
• Fill system crack
• Valve filter 160 cracks
• 80cm steering wheel crack
• Two cracked brass filter filters are installed separately to enter the nozzles on the left and right side of the fan
• The body of the fan and chassis is covered with three layers of epoxy liner and three layers of metallic car paint with a pencil tip
• Ability to install Bertolini pps100 Italy with 40 times pressure and flow of 95 liters per minute
• Comet 121 Italy diaphragm pump with 50 bar pressure and flow rate of 114 liters per minute
• Italian Comet 145 pump with 50 bar pressure and flow rate of 142 liters per minute