Field turbine sprayer
Turboliner sprayer Fan 550 is very efficient and useful for spraying farms and tall trees and the best type of sprayer in terms of spraying length
- Polyethylene poison tank with capacities of 1000 and 2000 liters
- Equipped with system wash tank and hand wash
- Valved door
- Resistant to sunlight
- Hydraulic stirrer crack
- Poison tank water level indicator
- Leaving the tee
- It has a double centrifugal fan with a diameter of 550 mm, adjustable for spraying poison all hydraulically with the help of a fan head with the ability to adjust the angle 90 degrees in the vertical direction by the jack and 180 degree horizontal rotation in the horizontal direction by the hydraulic motor and turbine set at an angle 60 degrees with the help of a jack for a stronger spray of poison
- Has a spray terminal to distribute the poison evenly to each nozzle and consequently
- Toxin exits the nozzles in equal amounts
- Useful spraying length more than 60 meters
- All fan parts consist of bent sheets and laser cut with thicknesses of 2, 3 and 5 mm.
- It has a large two-speed gearbox that increases the Italian fan speed
- It has 16 Italian nozzles, double-headed and anti-drip brass with fully powder spraying and uniform poison solution
- Complete coverage of the poison from the foot of the sprayer to the end of its range
- All hoses used in chassis and fan are high pressure hoses with a layer of steel wire.
Turboliner sprayer fan 550 mounted
- Traction chassis with standard two-point connection for easy connection to the tractor and proper controllability following the tractor and single-point connection
- Chassis parts consist of 140 x 8 mm fabric studs and other laser-cut parts with thicknesses of 5, 8, 12 and 20 mm.
- The chassis has a spring with wheels to adjust the vertical height up to 18 cm in 3 modes and adjust the horizontal distance between the wheels in 5 modes.
- Sliding and adjustable bearing
- Has a pair of flat tires
- A pair of truck fenders to prevent mud from splashing into the device.
- Has a crack filling system
- Valve filter 220 cracks
- Ward guard left parasite
- Two cracked brass shaft filters equipped with drain valve
- The body of the fan and chassis is covered with six layers of epoxy primer and six layers of metallic car paint with a pencil tip.
- It has an Italian Comet 145 diaphragm pump with a pressure of 50 bar and a flow rate of 142 liters per minute.